Core issue
This case provides a sample configuration for IP Security (IPSec) between the PIX Easy VPN (EzVPN) Remote Hardware Client and the PIX/ASA EzVPN server. The EzVPN remote feature for the PIX was introduced in PIX version 6.2 and is supported only in PIX 501 or PIX 506/506E. It is also referred to as the Hardware Client. Cisco EzVPN server is supported beginning with PIX Software version 6.0.
Resolution
For information on configuring EzVPN on the PIX, refer to the Configuring Cisco Easy VPN With PIX-to-PIX as Server and Client sample configuration.
To configure EzVPN on PIX/ASA version 7.x, refer to Easy VPN with an ASA as the Server and PIX as the Client
Problem Type
How to (General Information)
Product Family
Firewall - PIX 500 series
ASA Hardware & Software
PIX Software Version
PIX version 6.x
PIX version 7.x
ASA Software Version
7.2
7.0
7.1
PIX Model
PIX 500 Series Firewall
ASA Models
ASA 5500
ASA 5510
ASA 5520
ASA 5540
VPN Tunnel End Points
PIX
ASA
Features & Tasks
Easy VPN
VPN Protocols
IPSec