cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2825
Views
0
Helpful
0
Comments
TCC_2
Advocate
Advocate

Resolution

IPSec requires that clients be assigned an IP address when they connect to a VPN gateway. The client-supplied address feature is available only for connections through Point-to-Point Tunneling Protocol (PPTP) and Layer 2 Tunnel Protocol (L2TP).

There are two ways to configure this feature on the Cisco VPN 3000 Concentrator:

  • The Global Configuration option causes all PPTP and L2TP clients to use their own IP addresses.

    To configure this option, perform these steps:

    1. Navigate to Configuration > System > Address Management > Assignment.
    2. Select Use Client Address and click Apply.

  • The client-supplied address feature can also be configured for a client group.

To configure this option, perform these steps:

  1. Navigate to Configuration > User Management > Groups.
  2. Select the group to be updated with this option, and click Modify Group.
  3. Click the PPTP or L2TP tab.
  4. Place a check in the checkbox for the Use Client Address attribute.

Problem Type

Configure

Product Family

VPN - 3000 series concentrator

VPN - hardware & software clients

VPN 3000 Software Version

3.6

4.0

4.1

4.7

3.5

VPN 3000 Model

Concentrator models

Features & Tasks

Client supplied

VPN Protocols

Point-to-Point Tunneling Protocol (PPTP)

Layer 2 Tunneling Protocol (L2TP)

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers
Quick Links