05-21-2014 04:54 AM
Hi all,
I will need your help.
I have Nexus 5000, there is a POrt Channel between Nexus and Server, but one port always is in initializing.
sh interface Ethernet101/1/27
Ethernet101/1/27 is down (initializing)
Hardware: 1000/10000 Ethernet, address: c8f9.f920.5b5c (bia c8f9.f920.5b5c)
MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is trunk
auto-duplex, 10 Gb/s, media type is 10G
Beacon is turned off
Input flow-control is off, output flow-control is on
Rate mode is dedicated
Switchport monitor is off
Any idea?
Regards
05-21-2014 05:58 AM
Is the FEX dual-homed? If so, have you verified that both parent 5Ks have the interface settings the same?
05-22-2014 09:32 AM
Hi all thanks for reply,
probably the problem could be for NIC teaming? 1 nic could be in pasive mode?
Regards.
05-23-2014 12:03 PM
Is the port channel up and running or else issue is fixed.
05-21-2014 06:56 AM
how many ports are you using in this port channel.
can you paste the configuration of the channel ports and the interface.
check the sh log if you are getting any log related to the port channeling.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide