cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
911
Views
0
Helpful
6
Replies

UCSB200M3 Windows server 2012

petemcgarel
Level 1
Level 1

Hi All,

Can I ask how to load WinSvr2012 onto this blade server via KVM Console I've associated a service profile however I'm struggling to load the win 12 iso should I be loading something else first?

Many thanks for you're support in advance

 

6 Replies 6

Walter Dey
VIP Alumni
VIP Alumni

I assume you would like to install on local disk (or san boot ?).

Your boot policy need to point to 1) CD/DVD 2) local disk or SAN boot

Then in KVM you have to map the Windows 2012 R2 iso file

Start installation

During installation map to the driver iso and install enic / fnic drivers because they are distributed by MSFT.

see attached document and

https://vmwiz.wordpress.com/2013/07/18/cisco-ucs-and-windows-server-2012/
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/os-install-guides/3-1/b_Cisco_VIC_Drivers_Installation_Guide/b_Cisco_VIC_Drivers_Installation_Guide_chapter_010.html

Hi Walter,

You assume correct we would like to install win12r2 onto a local hard drive raid 0 however win 12 starts up we get to a point that I've mentioned in the above post then no joy at all?ive tried following the steps above however I'm stumped

thanks you for your support by the way 

Hi

Q. could you install the OS or not ?

Q. did you install the enic/fnic drivers ?

Hi Walter

Q. could you install the OS or not ?No we're still at the point of this message

We couldn't find any drives to get a storage driver click load driver "can someone point me to what drivers I need please

Q. did you install the enic/fnic drivers ?No it wont except them

During the windows installation you are asked if you want to install drivers (see w1).

Driver can be downloaded from

ISO image of UCS-related drivers  Login Required
ucs-bxxx-drivers.2.2.8.iso

https://software.cisco.com/download/release.html?mdfid=283853163&softwareid=283853158&release=2.2(8)&relind=AVAILABLE&rellifecycle=&reltype=latest

Please follow the procedure 

https://vmwiz.wordpress.com/2013/07/18/cisco-ucs-and-windows-server-2012/

Hi Walter,

I get to S.S 2 & I think it going to get to S.S 2 however it goes back to S.S 1 I have no idea why & thank you for your input by the way its been really helpful

Many thanks

Mark

Review Cisco Networking for a $25 gift card