02-08-2011 02:12 AM
Hi there everyone,
Been working on this for 2 night already and still getting nowhere. Here is the configure.
Site A
=======
Local IP Address ===> RV042 ==> ADSL Modem
192.168.50.x ==> 192.68.50.1 ==> WAN IP (A.A.A.) using DYNDNS.com (Dynamic IP)
Subnet : 255.255.255.0
Phase 1:
Site B
=====
Local IP Address ===> BEFSX41 ==> ADSL Modem
192.168.2.x ==> 192.68.2.1 ==> WAN IP (B.B.B.)
Subnet : 255.255.255.0
Note : There is a remote gateway when I click on the status at BEFSX41. Is this used anywhere ?
Current Status
============
From Site A, if I change the remote Gateway to IP Only, I was able to establish a tunnel because RV042 provide me with connect button in the [Tunnel Test] tab. Even when the Tunnel test is connected. I am still not able to ping 192.168.2.1 from Site A.
If I use Dynamic IP with Domain Name resolved, the connect button does not appear and it just show Waiting for connections.
Need help. Thank you.
Jeremy Lee
02-08-2011 05:05 AM
Hi everyone,
I manage to have VPN tunnel finally working!!! but only with Fixed IP on both sides. The test also failed
RV042 ===> Set Remote Gateway to dyanmic IP with domain name from DYNDNS.com (Failed)
BEFSX41==> Set Remote Security Gateway to FQDN with domain name from DYNDNS.com (Failed)
Anyone care to share to have least does that mean VPN tunnel only work with fixed IP. Anyone care to share their exprience?
Screen at RV042
============
No. | Name | Status | Phase2 Enc/Auth/Grp | Local Group | Remote Group | Remote Gateway | Tunnel Test | Config. |
1 | OFFICE2 | Connected | 3DES/SHA1/2 | 192.168.50.0 255.255.255.0 | 192.168.2.0 255.255.255.0 | xxx.xxx.xxx.xx |
VPN Log at BEFSX41
================
2011-02-08 20:56:08
2011-02-08 20:56:08 IKE[1] Tx >> AG_I1 : 124.13.48.70 SA, KE, Nonce, ID
2011-02-08 20:56:12
2011-02-08 20:56:12 IKE[1] Tx >> AG_I1 : 124.13.48.70 SA, KE, Nonce, ID
2011-02-08 20:56:22 IKE[1] Rx << AG_I1 : 124.13.48.70 SA, KE, NONCE, ID, VID
2011-02-08 20:56:22 IKE[1] ISAKMP SA CKI=[7249ad18 cf425d1c] CKR=[ff1ae587 52ae185a]
2011-02-08 20:56:22 IKE[1] ISAKMP SA 3DES / SHA / PreShared / MODP_1024
2011-02-08 20:56:22 IKE[1] Tx >> AG_R1 : 124.13.48.70 SA, KE, Nonce, ID, HASH
2011-02-08 20:56:23 IKE[1] Rx << AG_I2 : 124.13.48.70 HASH
2011-02-08 20:56:23 IKE[1] Rx << QM_I1 : 124.13.48.70 HASH, SA, NONCE, KE, ID, ID
2011-02-08 20:56:23 IKE[1] Tx >> QM_R1 : 124.13.48.70 HASH, SA, NONCE, KE, ID, ID
2011-02-08 20:56:24 IKE[1] Rx << QM_I2 : 124.13.48.70 HASH
2011-02-08 20:56:24 IKE[1] ESP_SA 3DES / SHA / 3600 sec / SPI=[7ddb8afa:788ff921]
2011-02-08 20:56:24 IKE[1] Set up ESP tunnel with 0.0.0.0 Success !
2011-02-08 20:56:24
Thank you.
Regards
Jeremy Lee
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide