12-09-2021 02:07 PM
Hello,
I'm having trouble wrapping my head around a weird issue. I have two borders and one single fusion switch and they only have B1F1 and B2F1 connections. I have imported a route on the Fusion router so that I can leak into the fabric but the border node giving surprising results upon checking the routing table, FB1 learning routes via LISP instead of BGP, and CEF entry display the next-hop using the LISP tunnel!!
As an end result, the host inside the fabric cannot reach this subnet located outside the fabric.
I have checked border nodes have no static routes configured for this route.
Appreciate any suggestions
Here are some output;
FB1#sh ip route vrf PROD | in 10.1.20.28/30
l 10.1.20.28/30 [250/1], 2d01h, Null0
FB1#sh ip cef vrf PROD | in 10.1.20.28
10.1.20.28/30 10.1.25.10 LISP0.4099
FB1#sh ip bgp vpnv4 vrf PROD
*> 10.1.20.28/30 0.0.0.0 10 32768 ?
FB1#sh ip lisp map-cache detail eid-table vrf PROD
10.1.20.28/30, uptime: 2d01h, expires: 22:16:44, via map-reply, complete
Sources: map-reply, site-registration
State: complete, last modified: 2d01h, map-source: 10.1.25.10
Exempt, Packets out: 17924(10063175 bytes) (~ 00:00:03 ago)
Configured as EID address space
Locator Uptime State Pri/Wgt Encap-IID
10.1.25.10 2d01h up 10/10 -
Last up-down state change: 2d01h, state change count: 1
Last route reachability change: 2w6d, state change count: 11
Last priority / weight change: never/never
RLOC-probing loc-status algorithm:
Last RLOC-probe sent: never
Solved! Go to Solution.
12-18-2021 01:28 AM
Maybe have a look at https://www.cisco.com/c/en/us/support/docs/cloud-systems-management/dna-center/213525-sda-steps-to-configure-fusion-router.html#anc12
Inside the section of Fusion VRF Leaking.
BGP allowas-in and route filtering is needed
12-17-2021 01:56 PM
Do you have a diagram you could share along with the type of border nodes you are using (external or anywhere)?
12-18-2021 01:28 AM
Maybe have a look at https://www.cisco.com/c/en/us/support/docs/cloud-systems-management/dna-center/213525-sda-steps-to-configure-fusion-router.html#anc12
Inside the section of Fusion VRF Leaking.
BGP allowas-in and route filtering is needed
12-18-2021 04:26 AM
Issue has been resolved. There was no community tags configured thus causing the LISP and BGP redistribution loop.
Thanks for sharing the link
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide