cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
616
Views
1
Helpful
4
Replies

SDA Wireless

fatalXerror
Level 5
Level 5

Hi All, I am new in SDA, may I know how can I connect my WLC will it be directly to my Border Node or can I host my WLC centrally in my DC? Thanks

4 Replies 4

@fatalXerror 

 Both scenarios is possible. 

This is how your first scenario would look like

FlavioMiranda_0-1737379702866.png

 

This is how your second scenarion would look like

FlavioMiranda_1-1737379854054.png

 

https://www.cisco.com/c/dam/en/us/td/docs/cloud-systems-management/network-automation-and-management/dna-center/deploy-guide/cisco-dna-center-sd-access-wl-dg.pdf

 

Hi @Flavio Miranda , does it mean that if I have 5 fabric sites, I should have 1 or 2 WLCs in each fabric sites? Can I just put my WLC at my DC but still using Fabric Wireless?

@fatalXerror 

 Just now I saw on that document this note.

"Note: Ensure that the WLC is physically located on-site and does not sit across the WAN. Fabric APs must be in Local
mode and need less than 20 ms latency between AP and WLC"

With that note, It seems you can do both scenarios. The WLC needs to be connected to fabric, 

 

FlavioMiranda_0-1737382443988.png