Brocade/Broadcom does not support connectivity between Brocade SAN switch and Cisco SAN switches unless NPIV is used.
Either Cisco SAN switch needs to be converted to NPIV with trunking F-port to Brocade SAN switch in full fabric mode or vice versa. If you must have both SAN switches in full fabric mode (ie., regular switch operation), then you should contact
Cisco MDS TAC support for issues. Per my experience, Brocade/Broadcom will not support such a configuration.
(Also the last Cisco MDS Switch interop guide that I could find lists only Brocade 2400, 2800, 3200, and 3800 switches for interop mode 2. )
Join us live on Thursday, April 8 at 10 am PT (and on demand after) as we join Cisco and HashiCorp executives to discuss the importance of IaC automation, Intersight Service for Terraform, and how to better manage hybrid cloud infrastructure at scale...
Join us live on Thursday, April 8 at 10 am PT (and on demand after) where Cisco and HashiCorp executives will discuss the importance of IaC automation, Cisco Intersight Service for Hashicorp Terraform, and how to better manage hybrid cloud infrastructure...
How to START with Infrastructure as a code for Cisco Cloud Solutions
ACI Ansible Modules Documentation Guide
Cisco Collections on Ansible Galaxy
Cisco DevNet Learning Labs
DevNet Introduction to ACI and Ansible
DevNet Introduction to ACI a...
Here's how to get notified about Cisco software releases, like the Application Policy Infrastructure Controller (APIC) (APIC Software)
Go to software.cisco.com - where you download all Cisco software
Select Software Download