03-19-2008 11:18 AM
I am running Fabric Manager 3.1(2) to manage a pair of MDS 9509s. Every time I start the application, it discovers the fabric and gives it a new name with the next highest number than it used the last time. e.g., if it was called Fabric 2 last time I ran it, on the next startup of the application, it calls it Fabric 3. It really doesn't hurt anything, but there doesn't seem to be a point to it and it seems like it shouldn't happen.
Thanks.
03-25-2008 02:40 PM
The following URLs will help you:
Troubleshooting Switch Fabric Level Issues:
http://www.cisco.com/en/US/docs/ios_xr_sw/iosxr_r3.0/interfaces/command/reference/hr3fbrc.html
03-26-2008 05:04 AM
Thank you for your reply. I looked at these and I don't see anything that seems to address this issue. It's possible that I'm missing something. Could you direct me specifically to what you're referring to?
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide