Hi all,
We have a performance problem with a data cabinet attached to one port on a Nexus 3064T. Some random reads are not as fast as expected.
cisco Nexus3064T Chassis ("48x10G Base-T + 16x10G/4x40G Supervisor")
Software
BIOS: version 1.6.0
loader: version N/A
kickstart: version 6.0(2)U6(5)
system: version 6.0(2)U6(5)
I cannot configure flowcontrol on the interface and I can see that the port has it disabled.
SWI-STS-VIRT-STORAGE(config-if)# flowcontrol receive on
^
# sh int e1/17 flowcontrol
--------------------------------------------------------------------------------
Port Send FlowControl Receive FlowControl RxPause TxPause
admin oper admin oper
--------------------------------------------------------------------------------
Eth1/17 off off off off 0 0
Do you know a way to activate flowcontrol to receive the signaling?
Thanks!
