Thanks Ken for replying.
I have issued undebug all several times with no joy. I have also issued other no debug commands with no joy.
Output of "sh ver" below:
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.html
Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
BIOS: version 1.0.19
loader: version N/A
kickstart: version 5.0(4)
system: version 5.0(4)
BIOS compile time: 02/01/10
kickstart image file is: bootflash:///m9200-s2ek9-kickstart-mz.5.0.4.bin
kickstart compile time: 7/26/2010 15:00:00 [09/07/2010 21:02:14]
system image file is: bootflash:///m9200-s2ek9-mz.5.0.4.bin
system compile time: 7/26/2010 15:00:00 [09/07/2010 22:12:15]
Software
Hardware
cisco MDS 9222i ("4x1GE IPS, 18x1/2/4Gbps FC/Sup2")
Motorola, e500v2 with 1036300 kB of memory.
Processor Board ID JAE1238V2TH
Device name: SAN1
bootflash: 1023120 kB
Kernel uptime is 129 day(s), 23 hour(s), 40 minute(s), 8 second(s)
Last reset at 146690 usecs after Sun Dec 26 12:50:04 2010
Reason: Reset due to upgrade
System version: 4.2(7b)
Service:
Regards
Zubair
