iscsi jumbo frames

[kp-tkr2014]

hi,

I have nexus 9k switches.   The switch is connected to iscsi storage 

how to enable jumbo frame on the interfaces which is connected to iscsi and server 

Thanks

[Kirk J]

Please see https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/interfaces/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide_7x_chapter_011....

In addition to the all the networking interfaces the iSCSI traffic will traverse, your storage appliance, Server network card, ESXi vswitch, VMK port will also need to have the higher MTU set.

Kirk...