MDS 9506 Multilayer Director error at boot: Memory address bus failed at address 0x8, Please RESET the board

[rayl00001]

Hi all,

We have a MDS 9506 Multilayer Director with an error at boot on the console:

ERROR: Memory address bus failed at address 0x8

Please RESET the board

I have pulled all other cards and tried each of the controller cards, both exhibit the same error message.

Yes, I pulled power and power supplies to  see that "Resets" the board.

Thanks in advance for any help you may offer!

[InayathUlla Sharieff]

You need to RMA the board/module.