MDS cli commands to Brocade

[JimInKC]

I am new to MDS but very experienced with Brocade.  There's a Brocade cli command I love and trying to see if there's an equivalent command on NX-OS 4.1(3a).

The Brocade command is "zone --validate".  That would return all the zone / aliases with an "*" next to any WWID in a zone or alias that is NOT logged into the fabric (orphaned WWIDs).  Is there something like that in the MDS cli?

Thanks in advance,

Jim

[Kirk J]

This may not show zones that are not actually activated, but the following  should  at least show any wwpn's in active zonesets, that aren't logged in:

show zoneset active | egrep invert-match \*|zone

Thanks,

Kirk...