11-02-2010 01:10 AM
Hello,
I would like to make a report where the port number and ficon number are given.
The device manager shows me the relationship but I cannot report it (unless I do a printscreen)
The fabric manager reports don't show ficon numbers
The Fabric Manager Web Client allows me to create reports, but still no Ficon number
On Cisco CLI - Command Line Interface "show interface" shows a Ficon tag but this is not a Ficon number
Something like this
Port number Ficon port description
fc3/2 32 a portdescription
How ?
Regards,
Ivy
Solved! Go to Solution.
11-02-2010 01:31 AM
Hi Ivy,
You may want to try below commands: {X: is the FICON VSAN }
#show ficon vsan X portaddress brief
#show ficon vsan X portaddress {for detailed FICONport #s and descriptions}
I hope this answers your question.
Thanks,
Ozden
11-02-2010 01:31 AM
Hi Ivy,
You may want to try below commands: {X: is the FICON VSAN }
#show ficon vsan X portaddress brief
#show ficon vsan X portaddress {for detailed FICONport #s and descriptions}
I hope this answers your question.
Thanks,
Ozden
11-02-2010 01:51 AM
Hello,
Thank You for the help.
It gives me the desired report!
Ivy
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide