SNMP timeout on 9140

[richard]

I have a MDS 9140 that I can't access with Fabric Manager or Device Manager with SNMP v3. I could get in with this method last week. I can telnet in and use SNMP v2 using the community strings. When I try to use Device Manager I get a message saying busy network, no route, or snmpd is unresponsive. Is there any way to restart the snmpd process?

[owillins]

You cannot restart the snmpd manually, you will have to reboot the box.

[troelala01]

we have now the same problem on a 9509 switch with two supervisors. we tried to initiate a fialover earlier but with no succes.

what can we do?

btw, we're running on 1.2(1b)

we want to upgrade but first this issue has to be resolved.

[tblancha]

If you are not running with a NTP server, you can reset the clock to some other time and then set it back. So, if there is not a NTP server configured, do a: show clock, then clock set 00:00:00 1 jan 2005, and then another clock set to restore the current time

[troelala01]

Thanks!!, worked great.

i'm becoming handy on the CLI of cisco only i'm missing my Brocade commands ;)