Unable to ping the remote FCIP peer

[ptakedaibm]

I need some guidance from the experts here.

I have a MDS 9222i for FCIP to a remote site. I am unable to ping the remote peer, however I am able ping the remote default gateway. See below:

FCIP_switch_22# sh ip route configured
         default      10.16.230.1          0.0.0.0      0            mgmt0
     10.27.238.0      10.27.238.1    255.255.255.0      0 GigabitEthernet1/2
     10.27.238.0     10.27.238.65    255.255.255.0      0 GigabitEthernet1/1

FCIP_switch_22# ping 10.27.238.82
PING 10.27.238.82 (10.27.238.82) 56(84) bytes of data.

--- 10.27.238.82 ping statistics ---
12 packets transmitted, 0 received, 100% packet loss, time 11036ms


FCIP_switch_22# ping 10.27.238.1
PING 10.27.238.1 (10.27.238.1) 56(84) bytes of data.
64 bytes from 10.27.238.1: icmp_seq=1 ttl=248 time=12.9 ms
64 bytes from 10.27.238.1: icmp_seq=2 ttl=248 time=15.8 ms

--- 10.27.238.1 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1007ms
rtt min/avg/max/mdev = 12.933/14.390/15.848/1.462 ms

Source
FCIP_switch_22 is a MDS 9222i
Management IP: 10.16.230.x
GigabitEthernet1/1 10.16.177.x
GigabitEthernet1/2 10.16.177.x

Target
FCIP_switch_24 is a MDS 9222i
Management IP: 10.27.230.x
GigabitEthernet1/1 10.27.238.x
GigabitEthernet1/2 10.27.238.x

Any suggestion ?

[Walter Dey]

Do you know the troubleshooting guide

http://www.cisco.com/c/en/us/support/docs/storage-networking/fiber-channel/47100-basic-fcip-mds.html

http://www.cisco.com/en/US/products/ps5989/prod_troubleshooting_guide_chapter09186a008067a31f.html#wp46977

Walter.