We have several stacks of 3750 switches where this problem is occurring. All of the switches are running IOS version 12.2(50)SE3. (Yes, I know it's old.)
We're seeing inconsistency in how the stack reports members when issuing the following commands:
show switch
show version
show inventory
Not all members are showing up in the output of the "show version" and "show inventory" commands. For example:
HUNTI-WV-WDAC03#sh switch
H/W Current
Switch# Role Mac Address Priority Version State
----------------------------------------------------------
1 Member 108c.cff2.ea00 15 0 Ready
2 Member 8cb6.4f0a.a600 1 0 Ready
*3 Master 8cb6.4f0a.9c00 1 0 Ready
(all three switches in stack are displayed)
HUNTI-WV-WDAC03#sh version
... <output truncated>
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
1 52 WS-C3750V2-48PS 12.2(50)SE3 C3750-IPBASEK9-M
2 52 WS-C3750V2-48PS 12.2(50)SE3 C3750-IPBASEK9-M
* 3 52 WS-C3750V2-48PS 12.2(50)SE3 C3750-IPBASEK9-M
Switch 01
---------
Switch Uptime : 6 weeks, 3 days, 21 hours, 5 minutes
... <output truncated>
Switch 02
---------
Switch Uptime : 6 weeks, 3 days, 21 hours, 5 minutes
... <output truncated>
(switch 3 is not displayed)
HUNTI-WV-WDAC03#sh inventory
NAME: "3", DESCR: "WS-C3750V2-48PS"
PID: WS-C3750V2-48PS-S , VID: V06, SN: FDO1449X23L
NAME: "1", DESCR: "WS-C3750V2-48PS"
PID: WS-C3750V2-48PS-S , VID: V06, SN: FDO1449X2G0
(switch 2 is not displayed)
Has anyone else seen these symptoms? I searched the bug toolkit and was unable to find a match.
