Hello!
I have Cisco ASR1004 as ISG-server.
There are some messages in the log, that I can’t understand:
Jul 19 15:46:00.413 KRSK: %CMCC-3-PLIM_STATUS: SIP0: cmcc: A PLIM driver informational error txnpSideCheck, block 1e count 95
Jul 19 15:46:10.413 KRSK: %CMCC-3-PLIM_STATUS: SIP0: cmcc: A PLIM driver informational error txnpSideCheck, block 1e count 8b
Jul 19 15:46:20.413 KRSK: %CMCC-3-PLIM_STATUS: SIP0: cmcc: A PLIM driver informational error txnpSideCheck, block 1e count a5
Jul 19 15:46:30.413 KRSK: %CMCC-3-PLIM_STATUS: SIP0: cmcc: A PLIM driver informational error txnpSideCheck, block 1e count 87
This error appeared after traffic-shaping for subscriber services was enable.
What this? Any problem with system resources utilization? There is ~4K sessions, ~4Gb/sec down-stream and ~4GGb/sec up-stream traffic on interface (unfortunately this is only one interface for up and down).
Thank you!