assigning addiitional Watts to switch Port

[vsewpersad]

Hi

I have an old 2960C-12PC-l switch. I only have 3 wireless access points on it, which 2 of uses, 15.4w. I want to force my 3 port to give me 30w. is this possible? there is nothing else on the switch.

[Mark Malone]

Hi i think your limited to 12 looking at the doc per port

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-2960-c-series-switches/data_sheet_c78-639705.html

You could try this below but it may not be there , if not you cant increase sorry
SUMMARY STEPS

1. configure terminal

2. interface interface-id

3. power inline {auto [max max-wattage] | never | static [max max-wattage]}

4. end

5. show power inline [interface-id | module switch-number]

##################

Table 1.       Available Cisco Catalyst Compact Switch models

Model	Ethernet Ports	PoE Output Ports	Available PoE Power		Uplinks	MACsec
2960C-8TC-L	8 x 10/100 Fast Ethernet	N/A			2 x 1G copper or 2 x 1G SFP	N/A
2960C-8TC-S	8 x 10/100 Fast Ethernet	N/A			2 x 1G copper or 2 x 1G SFP	N/A
2960CPD-8TT-L	8 x 10/100 Fast Ethernet	N/A			2 x 1G (PoE+ input)	N/A
2960C-8PC-L	8 x 10/100 Fast Ethernet	8 PoE		124W	2 x 1G copper or 2 x 1G SFP	N/A
2960CPD-8PT-L	8 x 10/100 Fast Ethernet	8 PoE		Up to 30.8W[1]	2 x 1G (PoE+ input)	N/A
2960C-12PC-L	12 x 10/100 Fast Ethernet	12 PoE		124W	2 x 1G copper or 2 x 1G SFP	N/A
2960CG-8TC-L	8 x 10/100/1000 Gigabit Ethernet	N/A			2 x 1G copper or 2 x 1G SFP	N/A
3560C-8PC-S	8 x 10/100 Fast Ethernet	8 PoE+		124W	2 x 1G copper or 2 x 1G SFP	N/A
3560C-12PC-S	12 x 10/100 Fast Ethernet	12 PoE+		124W	2 x 1G copper or 2 x 1G SFP	N/A
3560CG-8TC-S	8 x 10/100/1000 Gigabit Ethernet	N/A			2 x 1G copper or 2 x 1G SFP	Yes
3560CG-8PC-S	8 x 10/100/1000 Gigabit Ethernet	8 PoE+		124W	2 x 1G copper or 2 x 1G SFP	Yes
3560CPD-8PT-S	8 x 10/100/1000 Gigabit Ethernet	8 PoE		Up to 23.8W[2]	2 x 1G (PoE+ input)	Yes

[Leo Laohoo]

Post the complete output to the command "sh power inline".

[Reza Sharifi]

Hi,

2960C-12PC-l comes with standard POE (15.4w max per port) and you can't combine multiple ports to get 30w.

HTH