C2960s IOS Push error

[Spring@812]

Hi

i prgressing the IOS push for C2960S platform because i have to connect to using the ssh 2222(port number)

currently,it only connection to ssh 22

(as i through,it need to IOS upgrade for a connection to ssh 2222)

but,it occure the error as below.

would you please advise why occured this error & recommand the IOS version for this device which connection to ssh 2222

- device Model : ws-c2960s-24ts

- current the IOS version : c2960s-universalk9-mz.122-55.SE7

- will push the IOS version :c2960x-universalk9-mz.152-2.E3.bin

- Error message

Loading "flash:/c2960x-universalk9-mz.152-2.E3.bin"...Bootable image segment 1 address range [0x3400000, 0x55b3ca8] not in range [0x0, 0x557fffc].

Error loading "flash:/c2960x-universalk9-mz.152-2.E3.bin"

[Mohsin Alam]

you are trying to push 2960X OS to a 2960S switch.

Make sure you use the correct IOS file. 

## Make sure to mark post as helpful, If it resolved your issue. ##

[tech_gubby]

You are pushing irrelevant IOS. Please use the following link to 

https://www.cisco.com/c/en/us/support/switches/catalyst-2960-s-series-switches/series.html#~tab-downloads

And note that 2960S is EOL, you may need to replace the switch asap to get support.