cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
16217
Views
11
Helpful
5
Replies

Cannot Ping A Cisco 2960 Switch

avneet.singh
Level 1
Level 1

Hi

I have a Cisco 2960 switch which is connected to a Cisco 3560 switch. I am able to ping the 3560 but not the 2960. The 2960 is working fine and so are all the devices and PC's connected to it.

I have attached the configs of both the switches. Hope someone can help me out. Thanks

1 Accepted Solution

Accepted Solutions

Reza Sharifi
Hall of Fame
Hall of Fame

Hi Avneet,

Looking at your config below vlan1 is shutdown.  Do a "no sh" under vlan1 and test again.

interface Vlan1
ip address 10.1.2.11 255.255.0.0
no ip route-cache
shutdown

HTH

Reza

View solution in original post

5 Replies 5

Reza Sharifi
Hall of Fame
Hall of Fame

Hi Avneet,

Looking at your config below vlan1 is shutdown.  Do a "no sh" under vlan1 and test again.

interface Vlan1
ip address 10.1.2.11 255.255.0.0
no ip route-cache
shutdown

HTH

Reza

Thanks mate. That worked

Glad to help

Thanks for the rating

A big help to resolve an annoying little problem!

Cheers

newera-kamlesh
Level 1
Level 1

Hello everyone ,

 I have cisco 2960 switch ,which  is connected  SG 350 cisco switch .both switch are working fine ,also all devices connection is working  but i am not able ping mgmt. IP locally of both switch.also  getting two gateway alternately.

 i have given - 10.168.228.1 -working

                        10.168.228.128 -also working 

I have attached both switch configuration .pls help me out this .