Hello all,
I've the following questions regarding QoS on IOS XE:
- QoS Trust port - Which command should I configure at port configuration level on 10G port which is connected to a switch to trust the packets with DSCP configured received by the other switch? It was not qos trust dscp?
- QoS Policing - I've configured a class A referenced to a Policy-map A and I'm trying to setup the following scenario:
Max. Bandwidth 40Mbit/s, Policing 20Mbit/s conform-action, exceed-action allocate Bandwidth until 40Mbit/s and violate action drop...Are this the right setup with the right commands???
Policy-map A
class-map A
bandwidth 40m
police 20m 20m conform-action transmit exceed-action transmit violate-action drop
Thanks in advance for the support
BR
Omar