cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1264
Views
0
Helpful
3
Replies

Cisco Event syslog types

Does any know the location (if its published) of a complete list of event types that can generated from a Catalyst 9300 IOS XE and a ASR 9006?  This is requirement from a government customer and I have not been able to find these two products.

 

I found one for our ASA at...

https://www.cisco.com/c/en/us/td/docs/security/asa/syslog/b_syslog/syslogs-sev-level.html

 

Thanks in advance.

1 Accepted Solution

Accepted Solutions

lagerplane
Level 1
Level 1

Hey twernet@vernox.com it seems what you want is this:

https://www.cisco.com/c/en/us/support/switches/catalyst-9300-series-switches/series.html#Troubleshooting

Go to that "Troubleshooting" section and see the "System Message Guide for Cisco IOS XE" links.

If your C9300 is running IOS-XE 17.3.X then you would want to go to "System Message Guide for Cisco Catalyst Series Switches, Cisco IOS XE Amsterdam 17.3.x" that will download an Excel file with that info.

If your C9300 is running say IOS-XE 17.6.X then you would want to go to "System Message Guide for Cisco IOS XE Bengaluru 17.6.x" that will open a web page instead of downloading an Excel file but will have also the same type of info.

View solution in original post

3 Replies 3

Hey MHM,

 

Thanks for the link but I am looking for actual events that the system might generate.  In the link I provided it shows what logs are produced by the ASA for different logging levels.  I need something like that if it is available.

 

Thanks.

lagerplane
Level 1
Level 1

Hey twernet@vernox.com it seems what you want is this:

https://www.cisco.com/c/en/us/support/switches/catalyst-9300-series-switches/series.html#Troubleshooting

Go to that "Troubleshooting" section and see the "System Message Guide for Cisco IOS XE" links.

If your C9300 is running IOS-XE 17.3.X then you would want to go to "System Message Guide for Cisco Catalyst Series Switches, Cisco IOS XE Amsterdam 17.3.x" that will download an Excel file with that info.

If your C9300 is running say IOS-XE 17.6.X then you would want to go to "System Message Guide for Cisco IOS XE Bengaluru 17.6.x" that will open a web page instead of downloading an Excel file but will have also the same type of info.