Command for configuring WS-C4500X-32SFP+ fron Scratch

[okoroji80]

Hi all,

I have an integration between Cisco  WS-C4500X-32SFP+  and Cisco 3560x that would require trunking etc.

I would need an assistance on setting up Cisco WS-C4500X-32SFP+ from the scratch , especially in the areas of :

integrate 10g with 1g interfaces so as to achieve seamless connectivity with other lower model  switches like:

3560x , Cisco 2960...

[devils_advocate]

There are plenty of guides online which detail how to setup a Cisco switch so I will just go over connecting the switch to another switch.

Effectively you just configure a Trunk port, the same as you would any other switch. The 4500X switch ports are either 1Gb or 10Gb and it will depend on the SFP you plug in. You can plug in a 1Gb SFP and connect this port to another switch and configure a Trunk between them.

interface te1/x/x
switchport mode trunk