07-14-2015 10:24 AM - edited 03-08-2019 12:58 AM
Hi All,
We have enabled DHCP Snooping on switches, users were able to get IPs from Local DHCP server, but unable to get IPs from remote DHCP server,
This is the second attempt we did , but users unable to get IPs from Remote DHCP server(Windows server). DHCP trust enable all uplink ports .
Please let me know if any aditional configuration to be done at Router/Remote DHCP server side.
Sample diagram is attached for reference...
Thanks
Sri
07-14-2015 10:31 AM
Hello Sri,
Try with this command on switch1 and switch2.
no ip dhcp snooping information option
thanks
Rizwan Rafeek.
07-14-2015 10:32 AM
Hi Rizwan,
Where should I configure this command ( on switches/ on router at remote site)
Thanks
Sri
07-14-2015 10:36 AM
On switch1 and switch2.
07-14-2015 11:52 AM
Rizwan, I will give a try and let you know - Sri
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide