05-15-2013 10:04 AM - edited 03-07-2019 01:22 PM
Hi everyone,
Hope you can help... My manager asked me to check all our Cisco equipment (including router and switches, , wifi, and ASA we have) to see if they are IPV6 capable....
May I ask what I need to check? OR any special procedures?
Thank you for your help.
Takami Chiro
Solved! Go to Solution.
05-15-2013 10:25 AM
Hi,
You will need to use the feature navigator based on the version of IOS and the platform you are using. Look under "research Software" to figure out if your IOS and platform support IPv6.
http://tools.cisco.com/ITDIT/CFN/
HTH
05-15-2013 10:25 AM
Hi,
You will need to use the feature navigator based on the version of IOS and the platform you are using. Look under "research Software" to figure out if your IOS and platform support IPv6.
http://tools.cisco.com/ITDIT/CFN/
HTH
05-15-2013 10:43 AM
Thank you very much for your help!
Takami Chiro
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: