Layer_3 Switch 3750

[ahmedalnajjar]

I have Layer_3 " 3750-x " , so I con't do any routing on the switch , so please if I need to Upgrade the IOS give me the preffered image that support hte routing , and Is it free or should I pay?

[Reza Sharifi]

when you say routing, what are you trying to do? OSPF, BGP, EIGRP, static route, etc...?

It has nothing to do with IOS version.  It all deends on your license level

Can you post sh ver?

Also

try this

config t

ip routing

HTH

[ahmedalnajjar]

WS-C3750X-24P-L this is the Switch model

I need to do Rip

[Reza Sharifi · Accepted solution]

post sh version

[ahmedalnajjar]

12.2(55)SE3

[Reza Sharifi]

The reason I asked for sh ver is because it tells you what license level you currently have.

You can also get that with

sh license

Anyway, if you license level is IP Base you can run RIP.

HTH

[ahmedalnajjar]

It is not IP base , it is LAN base

[Reza Sharifi]

Lan Base doesn't support routing:

http://http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/white_paper_c11-579326_ps10745_Products_White_Paper.html