07-18-2012 06:11 AM - edited 03-07-2019 07:50 AM
Hi guys,
Iam having trouble to configure routing between 2 vrfs i got.
after a few troubleshooting method we figure out that the MAC address of the port 1/X and the port it`s connected 1/Y has the same mac address.
So in this case the traffic wont go throw since they have the same mac.
Anyone have a suggestion?
07-18-2012 09:55 AM
Hello Liad,
you should configue manually a MAC address on one of the two ports if this is supported on NX-OS
We could do this on SVIs on C6500 and this fixed the issue
Hope to help
Giuseppe
07-18-2012 11:16 PM
Yea this solution is aviliable for 6500 only.
In nexus 5k you cant change the mac address.
what happed is the n5k every VDC has it`s own mac address. (and since you got only 1 vdc on the 5k you have 1 mac).
The solution was to create a vrrp and use it`s unique virtual mac address to establish the connection.
Thanks for your help!!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide