QOS catalyst 6000

[NBouassiba]

Hi,

I want to configure QOS on the catalyst 6000 ( SUP2/msfc2) to mark voip traffic from the Aastra telefon with a higher priority.

How can I do configure this ? the catalyst is running IOS version 12.2(18)SXF11, the Aastra telefon is connected to an access port, the FE-module is

WS-X6348-RJ-45.

Thanks

[Reza Sharifi]

Please check the telephone documentation. They will provide examples of connection to Cisco switches

You may have to configure LLDP to support it

HTH

Reza