removing arp inspection LIMIT on global configuration

[hi.sadiki]

Hello Guys,

I am asked to remove the arp inspection LIMIT from all interfaces on all switches (1000 switches)

I have a script that can send commands on all equipements.

the problem is that i can't send  :

Int ranges XX - XXX

ip inspection limit none

and send the commands, as there is 24ports switches,  48 ports switches,  fastehternet, Gigaethernet,..... they all differentes.

Is there any other way, to do it on globale configuration for instance ? or any other way, Prime ? .....

Many thanks for your help

[Austin Sabio]

you should be able to group switches by platform using prime or any network inventory system, then write/modify your script -or use prime- per platform to push the requested changes in a maintenance window -its so important to test it first on a lab switch after hours- also I would advise to consider 'no ip arp inspection limit' as the interface reverts to its default rate limit. I hope this helps and good luck!