cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

252
Views
0
Helpful
1
Replies
Highlighted
Beginner

Routers to Router via switch (subinterfaces)

I have attached the diagram snap.png

1. Router LHR For WAN (1 physical interface on which using 2 subinterfaces) - Fa0/0 1.0.0.0/24 & Fa0/0.1 3.0.0.0/24

2. Router (ISP) Using 4 physical interfaces (2 of them are connected to the Switch for Router LHR)

Problem is: As Router LHR using subinterfaces and Router ISP using 2 physical interfaces to connect eachothers. How it will be possible!!!

1 REPLY 1
VIP Expert

Routers to Router via switch (subinterfaces)

You would need to use 2 physical interfaces.  The 2 ISP connections are connecting to the switch which each will go to a different vlan (access ports).  You would need to the the same on your side.  If the ISP would trunk the connection to your switch and use 2 different sub-interfaces, you could do the same on your side.

HTH

CreatePlease to create content
Content for Community-Ad