Guys
My upgrade is not going as smooth as I would like. Blow is what I did and the errors/messages. Any idea how to recover the standby supervisor?
copy tftp://image.bin bootflash:image.bin
copy bootflash:image.bin slaveboot:image.bin
Switch# config terminal
Switch(config)# config-register 0x2
Switch(config)# boot system flash slot0: cat4000-is-mz.121-11b.EW
Switch# copy running-config start-config
Switch# redundancy reload peer
After the peer reloaded this is what I'm having
25w5d: %C4K_REDUNDANCY-6-MODE: ACTIVE supervisor initializing for rpr mode
25w5d: %C4K_REDUNDANCY-2-IOS_VERSION_CHECK_FAIL: IOS version mismatch. Active supervisor version is 12.1(19)EW1,. Standby supervisor version is 12.2(54)SG1,. Redundancy feature may not work as expected.
25w5d: %C4K_REDUNDANCY-5-CONFIGSYNC: The bootvar has been successfully synchronized to the standby supervisor
25w5d: %C4K_REDUNDANCY-5-CONFIGSYNC: The config-reg has been successfully synchronized to the standby supervisor
25w5d: %C4K_REDUNDANCY-5-CONFIGSYNC: The calendar has been successfully synchronized to the standby supervisor
25w5d: %C4K_REDUNDANCY-5-CONFIGSYNC: The startup-config has been successfully synchronized to the standby supervisor
25w5d: %C4K_REDUNDANCY-5-CONFIGSYNC: The private-config has been successfully synchronized to the standby supervisor
25w5d: %C4K_REDUNDANCY-5-CONFIGSYNC_RATELIMIT: The vlan database has been successfully synchronized to the standby supervisor
Show redundancy states
my state = 13 -ACTIVE
peer state = 1 -DISABLED
Mode = Simplex
Unit = Primary
Unit ID = 1
Redundancy Mode (Operational) = RPR
Redundancy Mode (Configured) = RPR
Split Mode = Disabled
Manual Swact = Disabled Reason: Simplex mode
Communications = Down Reason: Simplex mode
client count = 4
client_notification_TMR = 60000 milliseconds
keep_alive TMR = 9000 milliseconds
keep_alive count = 0
keep_alive threshold = 18
RF debug mask = 0x0
SHow module
Chassis Type : WS-C4507R
Power consumed by backplane : 40 Watts
Mod Ports Card Type Model Serial No.
---+-----+--------------------------------------+------------------+-----------
1 2 1000BaseX (GBIC) Supervisor(active) WS-X4515 JAE080200S5
2 Standby Supervisor
3 48 10/100BaseTX (RJ45) WS-X4148-RJ JAE07510SEC
4 48 10/100BaseTX (RJ45) WS-X4148-RJ JAE0751010W
5 48 10/100BaseTX (RJ45) WS-X4148-RJ JAE0752019F
6 48 10/100BaseTX (RJ45) WS-X4148-RJ JAE07510S4V
7 18 1000BaseX (GBIC) WS-X4418-GB JAE0746099M
M MAC addresses Hw Fw Sw Status
--+--------------------------------+---+------------+----------------+---------
1 000e.d798.1880 to 000e.d798.1881 3.1 12.1(20r)EW 12.1(19)EW1, EAR Ok
2 Unknown Unknown Unknown Other
3 000e.8359.95c0 to 000e.8359.95ef 3.1 Ok
4 000e.8359.2a80 to 000e.8359.2aaf 3.1 Ok
5 000e.8366.7360 to 000e.8366.738f 3.1 Ok
6 000e.831d.1220 to 000e.831d.124f 3.1 Ok
7 000d.bcf6.547e to 000d.bcf6.548f 1.4 Ok
Thanks Guys
