2020-05-29 01:22 PM 2020-05-29 06:36 PM 更新
Catalyst 3850 / 3650、Catalyst 9K では 16.9 train 以降 Smart License の使用が必要となっています。
本ドキュメントは、SLR (Specific License Reservation) の方式でライセンスを適用する方法を紹介します。
Catalyst 3650 / Catalyst 3850、Catalyst 9K シリーズが対象となります。
Step 1 : SLR を Smart License Client に設定、イネーブル
SLR を実行するにはまず SLR をイネーブルにする必要がございます。
下記コマンドで SLR をイネーブルにしてください。
コマンド:
license smart reservation
設定後、「show license reservation」コマンドで License reservation: ENABLED となっていることを確認
実行例/出力例:
Catalyst3650(config)#license smart reservation
Catalyst3650#show license reservation
License reservation: ENABLED
Step 2 : Request Code を発行する
SLR で Smart License の適用時、製品上で Request Code の発行が必要です。
下記コマンドで Request Code を製品にて発行してください。
コマンド:
license smart reservation request [all | local ]
•Local – Generates only for active device
•All – Generates a request code for all connected device
*スタック構成の場合は「all」を投入ください
実行例/出力例:
単体:
Catalyst3650#license smart reservation request local
Enter this request code in the Cisco Smart Software Manager portal:
UDI: PID:WS-C3650-24PD,SN:FDO2203xxxx
Request code: CE-ZWS-C3650-24PD:FDO2203xxxx-AGGXaoKyQ-DB
スタック:
Catalyst3650#license smart reservation request all
Enter this request code in the Cisco Smart Software Manager portal:
UDI: PID:WS-C3650-24PD,SN:FDO2203xxxx
Request code: CD-ZWS-C3650-24PD:FDO2203xxxx-AGGXaoKyQ-23
UDI: PID:WS-C3650-24PD,SN:FDO2203xxxx
Request code: CD-ZWS-C3650-24PD:FDO2203xxxx-AGGXaoKyQ-CF
Step 3 : CSSM で Authorization Code file を生成する
Step2 で発行した Request Code を利用して CSSMでAuthorization Code file を生成します。
*スタックの場合は Active / Standby 両方とも Request Code を使用して Authorization Code file を生成する必要があります。
(1)Login CSSM
Smart Software Licensing をクリック
(2)1. Inventory 選択-> 2. Virtual Account 選択 -> 3. Licenses 選択 -> 4. license Reservation 選択
(3)5.製品で発行した Request Code を入力 -> 6. Next をクリック
(4)7.Reserve a specific license 選択 -> 8.必要な license 数を入力 -> 9. Next をクリック
(5)10. Generate Authorization Code をクリック
(6)11. Download as File をクリックして生成されたファイルをダウンロード
Step 4 : 生成された Authorization code file をスタックにコピーし、Authorization Code file を install
Step3で生成した Authorization code file を製品にコピーして、インストールします。
*スタックの場合は生成された2つの Authorization code file を両方とも機器へコピーして install を実施してください。
Step 5 : Authorization code file のコピー方法
実行例/出力例:
TFTP/FTP/USB など経由で機器の flash: に対象 Authorization code file を Copy します。
※機種によって flash の保存先が異なりますので、各機器の保存先を確認してください。
Catalyst3650# # copy tftp: flash:
Address or name of remote host []? x.x.x.x
Source filename []? AuthorizationCode-active.txt
Destination filename [AuthorizationCode-active.txt]?
Accessing tftp://x.x.x.x/AuthorizationCode-active.txt...
Loading AuthorizationCode-active.txt from x.x.x.x (via GigabitEthernet0/0): !
[OK - 713 bytes]
dir コマンドで Authorization code file がコピーできたことを確認します。
Catalyst3650#dir
Directory of flash:/
62109 -rw- 713 Feb 27 2020 04:03:27 +00:00 AuthorizationCode-active.txt
Step 6 : Authorization code file のインストール
コマンド:
license smart reservation install file <file>
実行例/出力例:
単体:
Catalyst3650#license smart reservation install file AuthorizationCode-A.txt
Reservation install file successful
Last Confirmation code UDI: PID:WS-C3650-24PD,SN:FDO2203xxxx
Confirmation code: 504d9e66
スタック:
Catalyst3650#license smart reservation install file AuthorizationCode-active.txt
Reservation install file successful
Last Confirmation code UDI: PID:WS-C3650-24PD,SN:FDO2203xxxx
Confirmation code: 3be8de72
Catalyst3650#license smart reservation install file AuthorizationCode-standby.txt
Reservation install file successful
Last Confirmation code UDI: PID:WS-C3650-24PD,SN:FDO2203xxxx
Confirmation code: a2eb7260
Step 7 : License の Status を確認
SLR でライセンス適用後、下記 show コマンドで正常に適用できているかを確認します。
コマンド:
show license summary
show license reservation
実行例/出力例:
単体:
Catalyst3650#show license summary
Smart Licensing is ENABLED
License Reservation is ENABLED
Registration:
Status: REGISTERED - SPECIFIC LICENSE RESERVATION
Export-Controlled Functionality: ALLOWED
License Authorization:
Status: AUTHORIZED - RESERVED
License Usage:
License Entitlement tag Count Status
-----------------------------------------------------------------------------
C3650_24_Ipbase (C3650-24 IP Base) 1 AUTHORIZED
Catalyst3650#show license reservation
License reservation: ENABLED
Overall status:
Active: PID:WS-C3650-24PD,SN:FDO2203xxxx
Reservation status: SPECIFIC INSTALLED on Feb 27 05:41:28 2020 UTC
Export-Controlled Functionality: ALLOWED
Last Confirmation code: 504d9e66
Specified license reservations:
C3650_24_Ipbase (C3650-24 IP Base):
Description: C3650 24 Port Ipbase
Total reserved count: 1
Term information:
Active: PID:WS-C3650-24PD,SN:FDO2203xxxx
License type: PERPETUAL
Term Count: 1
スタック:
Catalyst3650#show license summary
Smart Licensing is ENABLED
License Reservation is ENABLED
Registration:
Status: REGISTERED - SPECIFIC LICENSE RESERVATION
Export-Controlled Functionality: ALLOWED
License Authorization:
Status: AUTHORIZED - RESERVED
License Usage:
License Entitlement tag Count Status
-----------------------------------------------------------------------------
C3650_24_Ipbase (C3650-24 IP Base) 2 AUTHORIZED
Catalyst3650#show license reservation
License reservation: ENABLED
Overall status:
Active: PID:WS-C3650-24PD,SN:FDO2203xxxx
Reservation status: SPECIFIC INSTALLED on Feb 27 04:05:10 2020 UTC
Export-Controlled Functionality: ALLOWED
Last Confirmation code: 3be8de72
Member: PID:WS-C3650-24PD,SN:FDO2203xxxx
Reservation status: SPECIFIC INSTALLED on Feb 27 04:05:26 2020 UTC
Export-Controlled Functionality: ALLOWED
Last Confirmation code: a2eb7260
Specified license reservations:
C3650_24_Ipbase (C3650-24 IP Base):
Description: C3650 24 Port Ipbase
Total reserved count: 2
Term information:
Active: PID:WS-C3650-24PD,SN:FDO2203xxxx
License type: PERPETUAL
Term Count: 1
Member: PID:WS-C3650-24PD,SN:FDO2203xxxx
License type: PERPETUAL
Term Count: 1
Step 1 : 製品上で Return Code を生成する
適用したライセンスを remove するにはまず製品上で Return Code を生成する必要がございます。下記コマンドで Return Code を生成してください。
コマンド:
license smart reservation return [all | local ]
実行例/出力例:
単体:
Catalyst3650#license smart reservation return local
This command will remove the license reservation authorization code and the device will transition back to the unregistered state. Some features may not function properly.
Do you want to continue? [yes/no]: yes
Enter this return code in Cisco Smart Software Manager portal:
UDI: PID:WS-C3650-24PD,SN:FDO2203xxxx
Return code: ChwNCX-VdriCD-em5dgD-2fMArs-ZMZiku-m7sFK3-vFzFYy-QetDSM-bWG
スタック:
Catalyst3650#license smart reservation return all
This command will remove the license reservation authorization code and the device will transition back to the unregistered state. Some features may not function properly.
Do you want to continue? [yes/no]: yes
Enter this return code in Cisco Smart Software Manager portal:
UDI: PID:WS-C3650-24PD,SN:FDO2203xxxx
Return code: CdnGub-LYo1z2-fjUUht-o6zcrH-E9ZqPm-76pBUC-vWisUJ-9UjCWb-ZUH
UDI: PID:WS-C3650-24PD,SN:FDO2203xxxx
Return code: CSiCqd-NjbaHN-bNqaGV-hJyvPW-PpFYWC-emF6ZL-YTQ1z8-nPXDYV-NZy
Step 2 : CSSM で 該当 instance を remove する
Step1で Return Code 生成後、CSSM で該当 instance を remove します。
下記手順で実施してください。
(1) Login CSSM
(2)1.Inventory 選択-> 2. Virtual Account 選択 -> 3. Product Instances 選択 -> 4. remove したい機器を探し、action の矢印をクリック-> 5. Remove をクリック
(3)6.製品で生成された Return Code を入力 -> 7. Remove Product Instance をクリック
(4)ライセンス remove 後状態確認
Step 3 : 機器 で ライセンスの状態を確認
Step2で instance を remove 後、製品上で正常に適用していたライセンスが remove されているか確認します。
コマンド:
show license summary
show license reservation
実行例/出力例:
単体:
Catalyst3650#show license summary
Smart Licensing is ENABLED
License Reservation is ENABLED
Registration:
Status: UNREGISTERED
Export-Controlled Functionality: NOT ALLOWED
License Authorization:
Status: EVAL MODE
Evaluation Period Remaining: 10 days, 16 hours, 12 minutes, 55 seconds
License Usage:
License Entitlement tag Count Status
-----------------------------------------------------------------------------
(C3650-24 IP Base) 1 EVAL MODE
Catalyst3650#show license reservation
License reservation: ENABLED
Overall status:
Active: PID:WS-C3650-24PD,SN:FDO2203xxxx
Reservation status: NOT INSTALLED
Export-Controlled Functionality: NOT ALLOWED
Last return code: CR8KWp-ExTRWb-ZFvoqN-G4Rj6h-2g9nLr-W2gKoG-gn8kCh-XGBDfv-EXP
スタック:
Catalyst3650#show license summary
Smart Licensing is ENABLED
License Reservation is ENABLED
Registration:
Status: UNREGISTERED
Export-Controlled Functionality: NOT ALLOWED
License Authorization:
Status: EVAL MODE
Evaluation Period Remaining: 10 days, 16 hours, 21 minutes, 29 seconds
License Usage:
License Entitlement tag Count Status
-----------------------------------------------------------------------------
(C3650-24 IP Base) 2 EVAL MODE
Catalyst3650#show license reservation
License reservation: ENABLED
Overall status:
Active: PID:WS-C3650-24PD,SN:FDO2203xxxx
Reservation status: NOT INSTALLED
Export-Controlled Functionality: NOT ALLOWED
Last return code: CdnGub-LYo1z2-fjUUht-o6zcrH-E9ZqPm-76pBUC-vWisUJ-9UjCWb-ZUH
Member: PID:WS-C3650-24PD,SN:FDO2203xxxx
Reservation status: NOT INSTALLED
Export-Controlled Functionality: NOT ALLOWED
Last return code: CSiCqd-NjbaHN-bNqaGV-hJyvPW-PpFYWC-emF6ZL-YTQ1z8-nPXDYV-NZy
Specific License Reservation
Specific License Reservation についての概要
検索バーにキーワード、フレーズ、または質問を入力し、お探しのものを見つけましょう
シスコ コミュニティをいち早く使いこなしていただけるよう役立つリンクをまとめました。みなさんのジャーニーがより良いものとなるようお手伝いします
下記より関連するコンテンツにアクセスできます