appxk9 ライセンスを有効する手順は以下の通りです。
1. ルータでは Traditional License をご利用の場合、"license install <device>:<filename>" のコマンドでインストールします。
Smart Licenseをご利用の場合、以下のコミュニティ URL を参考し適応します。
<IOS-XE の Smart License の使用について>
2. config terminal でグローバルモードに入ります。
license boot level appxk9 と設定し、end -> write を実施します。
ISR#conf t
Enter configuration commands, one per line. End with CNTL/Z.
ISR(config)#license boot level
ISR(config)#license boot level appxk9
% use 'write' command to make license boot config take effect on next boot
ISR(config)#end
ISR#write
Building configuration...
[OK]
3. Reload を実施します。
4. 再起動して立ち上がりましたら、以下のコマンドで有効されていることを確認します。
#show ver
<Traditional License の場合>
Technology Package License Information:
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
appxk9 appxk9 Permanent appxk9 <<<<<<<<<<<<
<Smart License の場合>
Technology Package License Information:
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
appxk9 appxk9 Smart License appxk9 <<<<<<<<<<<<