この記事では無線接続しているクライアントの確認方法を紹介します。
GUI の方法
1) MONITOR > Clients から接続しているクライアントの一覧を確認
![](/legacyfs/online/media/clients.png)
2) 各クライアントの詳細は MAC アドレスをクリックして確認
![](/legacyfs/online/media/clientsdetail.png)
CLI の方法
1) show client summary
2) show client detail <クライアントの MAC アドレス>
(Cisco Controller) >show client summary
Number of Clients................................ 2
Number of PMIPV6 Clients......................... 0
GLAN/ RLAN/ MAC Address AP Name Slot Status WLAN Auth Protocol Port Wired PMIPV6 Role ----------------- ----------------- ---- ------------- ----- ---- ---------------- ---- ----- ------- ---------------- 3c:a9:f4:56:01:24 FW30-1702I 1 Associated 1 Yes 802.11n(5 GHz) 1 No No Local 5c:e0:c5:71:9a:df FW30-1702I 1 Associated 1 Yes 802.11ac(5 GHz) 1 No No Local
(Cisco Controller) >show client detail 3c:a9:f4:56:01:24 Client MAC Address............................... 3c:a9:f4:56:01:24 Client Username ................................. N/A AP MAC Address................................... d4:6d:50:ee:55:b0 AP Name.......................................... FW30-1702I AP radio slot Id................................. 1 Client State..................................... Associated Client User Group................................ Client NAC OOB State............................. Access Wireless LAN Id.................................. 1 Wireless LAN Network Name (SSID)................. cisco Wireless LAN Profile Name........................ cisco Hotspot (802.11u)................................ Not Supported BSSID............................................ d4:6d:50:ee:55:bf Connected For ................................... 142 secs Channel.......................................... 100 IP Address....................................... 172.29.194.48 Gateway Address.................................. 172.29.194.254 Netmask.......................................... 255.255.255.0 Association Id................................... 2 Authentication Algorithm......................... Open System Reason Code...................................... 1 Status Code...................................... 0
--More-- or (q)uit
|