Creation and Execution of Workflows in Cisco UCSD 6.7
We have recently Deployed Cisco UCSD Integrated with Cisco Hyperflex and VMware Environment.
We would be using this for the POC for multiple customers.
To leverage the Cisco UCS Director feature, we have Workflows in the Cisco UCSD.
I Have tried multiple times to create and execute some workflows like VM Provisioning, Getting management IPs of the Devices and many. But i am still not getting the inputs and the outputs to be seleted for the tasks and how to join them in a correct sequence for the execution.
Can anyone please help me with this? Any good documentation or a series of videos.
Or a good explanation form Cisco or any other experience engineer would be appreciated.
In this article, we are providing sample work flows for the private cloud management solution. In our topology, ACI is used for network. We have placed the BMA outside the UCS fabric and connected through L3 switch. The UCS ser...
This workflow will log onto a WLC and find the connected AP(s) and test if they are on the network.
Validated on UCSD 188.8.131.52
This came together via several parties of people (Sasha, Russ and Michael Z.)
The original question was this:
When deploying open automation connector module and trying to create side menu per UCSD docs
This contribution was provided by: Sabina Al Farah.
Many thanks go out to Sabina Al Farah.
2 Workflows are attached :
Ceph - Setup Cluster - using Ansible - on RHEL
Ceph - Provision Block Storage
This is an integration example between UCSD and Cohesity.
Posted for Russ (Please direct questions to: email@example.com)
Please watch video for more details: