The first workflow is about the creation of a thin device on a VMAX storage ,the second is about the creation of a distributed device on a vplex controller.
The two workflow works fine if I use them separately, but i need to use them as a single workflow.
I tried to create compound task from Vplex workflow, but did not work, because the second workflow need an information from the first one to start, and when the workflow starts the information did not exist yet.
so I need to create a custom task to get information from VMAX to use as output for another activity, to get this information I need to connect to VMAX from SSH and get the output of a command, then use this output in a following task.
Someone have a task template for make an ssh connection and get an output to use in another task?
In this article, we are providing sample work flows for the private cloud management solution. In our topology, ACI is used for network. We have placed the BMA outside the UCS fabric and connected through L3 switch. The UCS ser...
This workflow will log onto a WLC and find the connected AP(s) and test if they are on the network.
Validated on UCSD 220.127.116.11
This came together via several parties of people (Sasha, Russ and Michael Z.)
The original question was this:
When deploying open automation connector module and trying to create side menu per UCSD docs
This contribution was provided by: Sabina Al Farah.
Many thanks go out to Sabina Al Farah.
2 Workflows are attached :
Ceph - Setup Cluster - using Ansible - on RHEL
Ceph - Provision Block Storage
This is an integration example between UCSD and Cohesity.
Posted for Russ (Please direct questions to: firstname.lastname@example.org)
Please watch video for more details: