Hello,
I have a workflow, where a user can request an access port on a switch. The workflow has a custom approval task, where admin selects an interface on a specific device (device name and the interface are sent to the customer at the end of workflow workflow). The report for networking device interfaces (seems to be NetworkControllerdevice.n5k.n7k.config.interface.dc) contains:
ID, Pod, Device_IP, Interface_Name, Admin_Status, Operation_Status, Mode, Status, Hardware, Members, MAC_Address, IPAddress_Mask, IPv6_Address_Mask, MTU, Bandwidth_Mbps, Tag
All those parameters are related to either L3 (if IP is configured) or physical capabilities. When I select an interface to be assigned for that workflow, it is configured as an access port with specific VLAN assigned and some description. Now, when another request is initiated, there is no way to see which interfaces were assigned before, as most of the above data has no uniqueness (except the interface name itself). So, I thought it would be nice to have an Interface Description column. Then, I would know which interfaces are already reserved. How can I manipulate the report to include the interface description. I assume, the inventory collection process should also be able to fetch that data. Can it be done?
Cheers,
Krzysztof
