We are trying to deploy UCS Director 6.7 Multi Node setup on the Hyper V platform.
We have already deployed two instances of the UCS Director
1. UCSD DataBase NODE. 10.4.3.1
2. UCSD Primary NODE. 10.4.3.2
Now when i try to open my UCSD GUI using the Primary node IP Address, I am stuck at the page where it says "the system is starting up.Please wait while the system is ready" ( Anyways i waited for a whole day and it did not work out).
To further troubleshoot, i checked the services running on the primary node and got to know that some services are down.
1. Controller - Down
2. Eventmgr - Down
3. Idaccessmgr - Down
I also checked the service status on the DB Node and found out that my infradb is pointing to loopback interface eventhough when i have given the IP Address on the eth0 interface.
I will attach the primary node and DB node service status . Please help guys.
In this article, we are providing sample work flows for the private cloud management solution. In our topology, ACI is used for network. We have placed the BMA outside the UCS fabric and connected through L3 switch. The UCS ser...
This workflow will log onto a WLC and find the connected AP(s) and test if they are on the network.
Validated on UCSD 220.127.116.11
This came together via several parties of people (Sasha, Russ and Michael Z.)
The original question was this:
When deploying open automation connector module and trying to create side menu per UCSD docs
This contribution was provided by: Sabina Al Farah.
Many thanks go out to Sabina Al Farah.
2 Workflows are attached :
Ceph - Setup Cluster - using Ansible - on RHEL
Ceph - Provision Block Storage
This is an integration example between UCSD and Cohesity.
Posted for Russ (Please direct questions to: email@example.com)
Please watch video for more details: