I receive an error when entering data in a multiline input field of a compound task. The error is stating that I exceeded the maximum length of 255.
I created a workflow (flow1), that calls for a powershell script, and saved it as a compound task. When entering data in the input fields of this task, I can exceed the 255 characters.
When calling this flow from another flow (flow2), I can set the inputfield, to be multivalue (gen_text), however, I cannot add more than 255 characters anymore...
When adding the functionblock of flow1, you can add data in the multiline field, and save it. No error is reported. However, when editing the functionblock, there is no data saved in multiline field, and when saving, the error will be shown.
In this article, we are providing sample work flows for the private cloud management solution. In our topology, ACI is used for network. We have placed the BMA outside the UCS fabric and connected through L3 switch. The UCS ser...
This workflow will log onto a WLC and find the connected AP(s) and test if they are on the network.
Validated on UCSD 220.127.116.11
This came together via several parties of people (Sasha, Russ and Michael Z.)
The original question was this:
When deploying open automation connector module and trying to create side menu per UCSD docs
This contribution was provided by: Sabina Al Farah.
Many thanks go out to Sabina Al Farah.
2 Workflows are attached :
Ceph - Setup Cluster - using Ansible - on RHEL
Ceph - Provision Block Storage
This is an integration example between UCSD and Cohesity.
Posted for Russ (Please direct questions to: firstname.lastname@example.org)
Please watch video for more details: