Hi Guys, I understand that in UCSD we add APIC as Multi-Domain Controller and VMware as Virtual Account,
In such deployments , where although UCSD is there to manage Infrastructure , Do we normally require a direct integration between ACI and VMware ( through VMM ) and if yes what are the high level bucket items that we miss without such integration, appreciate your assistance
Using UCS Director you can automate all the operations that are required to add VMM Domain, DVSwitch, EPGs, contracts etc... on APIC, which automatically populate the configuration to vCenter. UCSD provides end-to-end automation between APIC, UCS and vCenter
In this article, we are providing sample work flows for the private cloud management solution. In our topology, ACI is used for network. We have placed the BMA outside the UCS fabric and connected through L3 switch. The UCS ser...
This workflow will log onto a WLC and find the connected AP(s) and test if they are on the network.
Validated on UCSD 220.127.116.11
This came together via several parties of people (Sasha, Russ and Michael Z.)
The original question was this:
When deploying open automation connector module and trying to create side menu per UCSD docs
This contribution was provided by: Sabina Al Farah.
Many thanks go out to Sabina Al Farah.
2 Workflows are attached :
Ceph - Setup Cluster - using Ansible - on RHEL
Ceph - Provision Block Storage
This is an integration example between UCSD and Cohesity.
Posted for Russ (Please direct questions to: email@example.com)
Please watch video for more details: