This workflow provisions a new VMFS Datastore (FC) to ESXi Cluster running on Vblock 3XX Converged Stack.
Compatible UCS Director Versions:
UCS Director 5.0.x
Virtualization, Compute, Network and Storage
Cisco UCS Director
VCE Vblock 3XX
The Vblock 3XX Infrastructure components (VMware vCenter, Cisco UCSM, Cisco Nexus 5Ks, MDS Switches (If any), Cisco Nexus 1000v & EMC VNX Storage Array) are added into UCS Director
Atleast one ESXi Host (SAN Booted) exist in ESXi Cluster
The SAN Zoning between ESXi Hosts and VNX Storage Array was already configured.
Workflow Tasks Included:
Select ESXi Cluster (Custom Task, it is imported along with the workflow)
Create VNX LUN
Add VNX LUN to Storage Group
Associate VNX LUN as Datastore
The below user inputs should be provided by user after executing the workflow.
User Input Description
Enter ESXi Datastore Name
Enter ESXi Datastore Size in GB
Select ESXi Cluster from drop-down to add VMFS Datastore
The Admin Input values are pre-defined in the workflow by the admin user. Edit the Workflow properties, go to user inputs section and modify the below inputs appropriately.
User Input Description
Select VNX Controller SP A or SP B
Workflow Additional Configuration:
After configuring the admin inputs, open the workflow using workflow designer and modify the below "TASKS" with appropriate user inputs. (Note: In upcoming versions, the below inputs should be able to configured as admin input values as well)
Create VNX LUN (Create VNX LUN for ESXi VMFS Datastore): Open the Task ---> Click 'Next' ---> Click 'Next' ---> Select EMC VNX Account, Select Storage Pool Type, Select RAID Type, and Select Storage Pool / RIAD Group Name for New LUN, Click 'Next' ---> Click 'Submit'
Instructions for Use:
Download the attached .ZIP file below to your computer. *Remember the location of the saved file on your computer.
Unzip the file on your computer. Should end up with a .WFDX file.
Log in to UCS Director as a user that has "system-admin" privileges.
Navigate to "Policies-->Orchestration" and click on "Import".
Click "Browse" and navigate to the location on your computer where the .WFDX file resides. Choose the .WFDX file and click "Open".
Click "Upload" and then "OK" once the file upload is completed, Select 'Add_New_VMFS_Datastore_to_ESXi_Cluster_on_Vblock_3XX' and Then click "Next".
A new folder called 'Vblock-3XX-Validated' should appear in "Policies-->Orchestration" that contains the imported workflow. You will now need to update the included tasks with information about the specific environment. (See Above)
Dears,We need to install new RAMs with P.N: UCS-MR-1X162RUA for UCS P.N: B200-M4. Unfortunately the server and related RMAs are end of sale. Do we have a chance to install third party RMS like HP, DELL, Kingston, etc? Thanks in advance.
Dear Experts, I am using "provision blank VM" task to create a new VM and there is no option where i can select the boot mode. I have also checked the different available APIs but still could not figure out. has anyone experience with this or an...
Hi, I am planning on upgrading NXOS and epld for our N9508s that have dual supervisors. having never done one before so wondering if one of you could could help me with the steps. I have read many documents by now and online threads they all seems to...
I wonder, how to apply a "vCenter VM Customization Specification" using UCS-Director. In PowerCLI I can use "Set-VMWVM ... -OSCustomizationSpec $spec" which applies a VM-Customization-Spec configured in the vCenter. I know the UCSD "VMware - Gue...
Hello,Does anyone know why VMRC console is not starting? The end-user has a possibility to enable/disable and launch the console. Once enabled, when I try to open it I get the message: Resource Not Available. It is UCSD 6.7.4 and vCenter 6.7. VM is up and...