Cisco UCS and Puppet have put together a new solution for rapid bare
metal provisioning in just a few steps. Provisioning is done through
Puppet's Razor module which offers a variety of options for installing
host environments on provisioned nodes. In thi...
Here's an overview of setting up a basic server environment on the UCS
Platform Emulator using the Python SDK. Portions of the script used in
the video are provided below. For more information on the emulator and
the Python SDK please see the following: P...
Here is a brief introduction to the new 3.1(1ePE1) UCS Platform Emulator
showing how to perform backup and restore(import) of the current UCSM
configuration. Backup/restore of the configuration is a good practice in
general and is necessary with the new P...
This brief video provides a demonstration and overview of the main
features and benefits found in UCS Central. You can also download the
UCS Central Best Practice Guide --- Updated for Release 1.1(2a)
in My Videos)
i have installed two numbers of cisco VIC 1385 card on UCS C240M5 server but in CIMC VIC adapter section only one card is listed. i have installed the cards in slot number 4 & 5. in VIC adapter section only slot 5 is showing. In PCI adapter i could se...
Hi everyone, We're purchased new UCSC-C220-M5SX server running 2 separated CPUs and using 2 UCS-M2-240GB in back slot as local storage. After following embedded raid config and driver download in link, wewas successfully created raid 1 virtual driver...
Hello team, We are unable to install Ubuntu 14 04 on Cisco UCS C240 M5 server which has RAID configuration. RAID Controller Info: RAID bus controller: LSI Logic / Symbios Logic MegaRAID Tri-Mode SAS3516 (rev 01) We are unable to find d...
Can someone please help me to find all service profile associated to a particular VLAN via command line in the UCSM. Eg: I have a VLAN (1022) existing in the UCSM named 'CSA-DBS-GG_1022'. We also have many service profiles existing in different ...