Hi I`m buying some refurbished equipment, trying to keep budget down . Got some questions about some cards for the Catalyst 4500 Series switches. The WS-X4648-RJ45-E card is overbooked 2:1. The WS-X4448-GB-SFP card is overbooked 8:1. Is this meanin...
HiI have some problems with Cisco 3750G-12S handling traffic above 700-800Mbps on gigabit interfaces.
When traffic peaks in that area network is sluggish and multicast TV streams stutter.Running Version 12.2(55)SE4 on these if that might have somethi...
Hi
I have set up a Cisco 3750 (IOS 12.2(55)SE4) where I need to be able to set some ratelimits on ports.What I need to achieve is to ratemit interface ge 1/0/5 to 50/50Mbps and interface 1/0/6 to 30/30Mbps.
Other Interfaces shuld work as normal.
What...
Hi
I have set up PIM sparse mode between some sites.
Site 1,2,3 and 4.
On site 1 I get the multicast service from provider, and have set up an RP.
Site 2 is behind site 1, and site 3 and 4 is behind site 2.
First I set up separate VLANs with link...
Hi
I`m setting up a network where each access port should be isolated from each other.
Thought I would use the protected port feature.
But the networks is spanning several switches, using protected ports, will access port on switch A be able to talk...
Sorry for bringing this up again.
Another tech mentioned that it might be a buffer problem on the 12S.Anybody know if that might be the case?Any thing that might solve this, adjust buffer size etc?
Thanks.
But is this for both egress and ingress?And I think the command refers to a prosentage of the interface speed.If it is a gigabit interface srr-queue bandwidth limit 30 will give 300Mbps?Do not know if it refers to potential, or actual speed o...