About mburguk1000

mburguk1000 · 02-24-2014

Hi Jon thanks for the prompt reply but Im still a bit unsure of what syntax I would use to get this ...

mburguk1000 · 02-24-2014

I have to configure an instance of a WCCP on a 4510 switch and I have to admit have read the example...

mburguk1000 · 01-15-2014

We have just installed a new SX-20 device and connected to network but we can ping and connect to ap...

mburguk1000 · 10-02-2012

I need to configure nat from inside to dmz, i have already configured one network object and now nee...

mburguk1000 · 09-12-2012

Cisco Adaptive Security Appliance Software Version 8.4(4)Device Manager Version 6.4(9)Compiled on Mo...

mburguk1000 · 09-12-2012

I have a ASA 5510 that has something weird going on I have just added a base config where you can ac...

mburguk1000 · 09-07-2012

Thanks all for your feedback

mburguk1000 · 09-06-2012

NO the call is not making it to the gate way it fails after dialing just 074 and you get error from ...

mburguk1000 · 09-06-2012

We have a call manager 6.1.4.1000 -10 and we are unable to dial numbers begining with 074 Its seems ...

mburguk1000 · 08-28-2012

We are in the process of implementing secondary ISP to our ASA firewall and I wondered if anyone els...

mburguk1000 · 09-21-2011

Thank you for your help

mburguk1000 · 09-21-2011

I want to migrate our Cisco Unity Connect voice mail server from a physical to virtual server does a...

mburguk1000 · 07-14-2011

I would like to configure a one of the physical buttons on Cisco 7941 to be linked to the personal a...

mburguk1000 · 06-07-2011

I am in the process of adding a new access layer switch for voice and Pcs and I have replicatedthe c...

mburguk1000 · 12-22-2010

I need to add an additional range of ddis to our callmanager. what we have on our current set up ran...

Configure WCCP on a 4510 switch