How do you move APs from controller to controller without having to restart the APs to avoid downtime?I've tried to manually add the primary controller in the AP config, but the AP doesn't move. I am using a 4404 controller with 1130 APs.
We have two sites.Site 1 (main site):Controllers reside at site 1 on the core 6500.When the broadcast initiator performs a broadcast, users with badges in the broadcast group can hear the chime and audio.Site 2:No controllers exists. Core is fiber c...
I have a 3845 that has increasing input errors, CRC and overrun on its g0/0 interface. The 3845 is connected to a WS-C3750G-48PS. The 3845's g0/0 is connected to the 3750's g2/0/1. However, 3750's g2/0/1 has no input errors, CRC, or overrun. Coul...
We have the following at our facility:- Vocera system- 2 Cisco Wireless Services Modules (WiSMs)Problem:Badge 1 can only make a successful badge-to-badge call with Badge 2 only if both badges are associated to APs running on WiSM A. If Badge 1 remai...
Firmware is 4.x. There hasn't been an upgrade. I used to be able to manually input the primary controller name and within seconds, the AP would move to the assigned controller. This function used to work so I'm stumped as to why it stopped working...
