Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a 3825 ISR with a NM-16ESW etherswitch module. When attempting to create vlans or modify vtp operations we get the following error:% not enough space on flash to store vlan database. trying squeeze...% error squeezing flash - (operation n...
There are instances that a particular event detector may trigger a policy multiple times within a short time-span. An example of this is if we are using the Interface ED to trigger a policy when the rxload passes a certain threshold. If we are pollin...
We have a site that is experiencing SIP Protocol Violation errors from the Zone-Based Firewall Policy configuration. Here is a little bit of info about the site design and some logs desplaying this particular error:-remote site connected to central s...
We have a site that is experiencing SIP Protocol Violation errors from the Zone-Based Firewall Policy configuration. Here is a little bit of info about the site design and some logs desplaying this particular error:-remote site connected to central s...
Like most companies, our primary monitoring strategy centers around SNMP with one or a few management stations that are usually remote from the equipment being monitored. I would really like to move towards leveraging EEM for some of our monitoring. ...
Joe, thanks for such a quick response. We are running 12.4(24)T1 on most of our equipment. I guess my question is somewhat two-fold: 1)does eem queue policies to run if another policy is currently running, and 2)is there a way that we can limit this ...
sadsiddi,Thanks so much for your response. We are investigating the strange non-RFC headers you mentioned in your post. We did make adjustments to our current firewall config and are now able to make calls from the phones. Thank you very much for you...
sadsiddi,Thanks so much for your help. I appologize it took me a little time to get back with you. I have the "debug policy-firewall protocol sip" output attached, as well as some brief packet-captures from around the same time. I'm going to set this...
Absolutely I can! Thanks so much for responding. Both routers are running advanced IP services 12.4(24)T1. I should be able to provide you with that output in the morning. I also do currently have packet captures.Thanks again for your help.
