About Luca CQ

Luca CQ · 03-06-2023

Hi all Cisco 7600 - Version 15.3(3)S5 i have an ATM configured with subinterface, with internal VLAN assigned by IOS: interface ATM 1/0/0.500 point-to-point ip vrf forwarding VPN_A ip address 10.1.1.1 255.255.255.252 pvc 100/500 class-vc XDSL ...!en...

Luca CQ · 02-14-2023

Hi all Question about this scenario:ASR 1009-X , IOS_XE linked to another router by interface g0/1.Customer has vrf TEST and wants 2 subnet p2p/31 configured on sub-interfaces as follows: g0/1.10 --> ip adrr 10.10.10.1/31 (other router has .2)g0/1...

Luca CQ · 02-18-2020

Hi Everybodyhave to install CMS2000, cabling directly on MLSwitch Cisco 7600 that is more than 100mt distant. I've read installation guide and UCS 6324 Fabric Interconnect data sheet where is written that CMS2000 has:1 port for management: 10/100/100...

Luca CQ · 03-07-2023

@Reza Sharifi @MHM Cisco World thanks for your replies (and thank you MHM for try this in your LAB if you can).Actually I think the the point, besides the 2 different VRFs, could be that the ATM is only L3 and so the vlan tag used is the one assigned...

Luca CQ · 02-15-2023

hi @MHM Cisco World , thank you! so it works with subinterfaces in the ip route static bfd commands, great thank you for your support and time

Luca CQ · 02-14-2023

Hello @balaji.bandi , @MHM Cisco World and thanks for your replies yes sub-interfaces are in the same VRF TEST: g0/1.10 --> ip adrr 10.10.10.1/31, vrf forwarding TEST, encap dot1q 10, etc (remote router has 10.10.10.2)g0/1.20 --> ip adrr ...

Member Since	‎02-18-2020 06:16 AM
Date Last Visited	‎03-13-2023 10:32 AM
Posts	6
Total Helpful Votes Received	5

User Statistics

User Activity

ATM sub-if and VLAN-ID

BFD + static route + sub interface

CMS 2000 cabling

Re: ATM sub-if and VLAN-ID

Re: BFD + static route + sub interface

Re: BFD + static route + sub interface