About whipcord1970

whipcord1970 · 01-23-2008

I had a client successfully loging on to a dhcp server through a 2821 router, this was with the clients address reserved on the server.When I attempted to reload the router having erased the startup-config the router tried to get its ip address from ...

whipcord1970 · 07-07-2006

I have a 2821 router with a hp switch connected to 0/0 and 0/1. Both switches have a pc connected, but I cannot ping from pc to pc. Doing a show arp in the router shows both pc's, but a show arp in either pc does not show the other pc but it does sho...

whipcord1970 · 01-24-2008

Are you running DHCP on a Windows server now? YES Windows Server 2003. The clients ip address is reserved in the windows dhcp.I do not want the router to manage dhcp but permit the initial dhcp transactions to occur through it. Thus giving the client...

whipcord1970 · 07-07-2006

Both interfaces are up/upPC1 IP address is 10.31.150.13 mask: 255.255.255.0Gateway 10.31.150.1PC 2 IP address is 193.126.89.232 mask:255.255.255.0Gateway 193.126.89.1Have removed static routes.

whipcord1970 · 07-07-2006

Hello GNTI have tried removing access list from the interfaces, but this doesn't seem to have helped. The access list were as the router is in a development environment set up to 'permit any'.

Member Since	‎07-07-2006 12:09 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	5

User Statistics

User Activity

DHCP Through a 2821 router

2821 Routing problem

Re: DHCP Through a 2821 router

Re: 2821 Routing problem

Re: 2821 Routing problem